Ikegami HC-HD300, Operation Manual

Page: 68 / 158

52 HC-HD300 1412 VER1 (U)
3.4 Monitor Connection
3.4 Monitor Connection
This section explains how to connect the HC-HD300 to the monitor.
Connecting Camera and Monitor
There are three connectors on the rear of the camera to output various video signals. The type of video signal output from each
connector is different. Be sure to connect to a correct connector via a coaxial cable in accordance with the monitor to be used.
- Q-TV/GL, MON OUT connector : Selection between Q-TV/GL and MON OUT is made by the Q-TV/GL, MON OUT SELECT
switch.
If Q-TV/GL is selected, this connector outputs the Q-TV OUT/VBS signal when the camera
is connected to the BS, or it inputs an external synchronization signal (GENLOCK) when the
camera is used stand-alone.
When MON is selected, this becomes the monitor output of the camera images, and the same
image signals are output as the viewfinder.
- SDI OUT connector : Outputs the digital serial video signal. Applicable to the HD-SDI signal (not applicable to the
SD-SDI signal).
- MON SDI connector : Outputs the digital serial video signal. Applicable to the HD-SDI signal (not applicable to the
SD-SDI signal).
Camera rear view
Coaxial cable
MON OUT
connector
Q-TV/GL, MON OUT
connector
HD SDI OUT
connector
rear view
HD Monitor (COLOR)