iKarus Stellar Mate Plus User Manual Download Page 91

Page: 91 / 227

The StellarMate Plus Manual

91 / 227

Alt:

The object's altitude must remain equal or higher than the given value.

Moon:

The moon separation must remain equal to or higher than the given value.

Weather:

Weather conditions must remain safe. When weather conditions become

dangerous, shutdown procedure is initiated.

Twilight:

The twilight restriction constraints jobs to execute in astronomical darkness.

Use the dusk and dawn offsets in the Ekos Scheduler options to adjust the interval.

Artificial Horizon:

The A.H restriction constrains the attitude of the target to be above

the artifical horizon. If any are defined and enabled. See the artificial horizon item in the
KStars Settings menu.

3- Job Completion:

Summary of Contents for Stellar Mate Plus



































































































































































































































Search results

Summary of Contents for Stellar Mate Plus

Reviews:

Brands by name

Popular brands

iKarus Stellar Mate Plus, User Manual

Search results

Summary of Contents for Stellar Mate Plus

Reviews:

Brands by name

Popular brands