iKarus Stellar Mate Plus User Manual Download Page 191

Page: 191 / 227

The StellarMate Plus Manual

191 / 227

In the main toolbar, the following controls/icons are visible:

Main Menu

: Click here to access the following:

Profiles

: Start/Stop Ekos Profiles

Settings

: Change EkosLive Settings such as notifications, sounds, and theme.

Ekos Status Icon

: When Ekos is connected to your equipment, this icon should turn

. When no profile is active and Ekos is not connected to your equipment, this icon

should turn

Cloud Status Icon

: This icon should remain

as long as you are connected to the

internet. If it turns

, check your internet connection.

If no Ekos Profile was started before connecting to EkosLive, the Ekos Status Icon should
be Red. You can either start the

Ekos Profile

directly in Ekos, or by clicking the Menu, and

then selecting Profiles, and then selecting which profile to start. Once the Ekos Profile is

Summary of Contents for Stellar Mate Plus



































































































































































































































Search results

Summary of Contents for Stellar Mate Plus

Reviews:

Brands by name

Popular brands

iKarus Stellar Mate Plus, User Manual

Search results

Summary of Contents for Stellar Mate Plus

Reviews:

Brands by name

Popular brands