manualshive.com logo in svg

iKarus Stellar Mate Plus, User Manual

Share
Download
iKarus Stellar Mate Plus User Manual Download Page 132

The StellarMate Plus Manual

132 / 227

StellarMate unit is shipped with a full-featured Linux® Operation System that you can
directly access. The default username and password are:

username

: 

stellarmate

password

: 

smate

This is the same username and password you will use when accessing the unit over Web
VNC as well. It is highly recommended to change the default password after your first login
to the system.

Connecting your equipment

StellarMate supports connecting to your equipment via WiFi, Ethernet, Bluetooth, or USB.
USB is the primary connection method for most astronomical devices. Make sure all
equipment is sufficiently powered and initialized before connecting them to StellarMate.
For mounts, most mounts need to be already aligned before you connect them to
StellarMate.

The following equipment-specific guides provides the standard methods for connecting
such equipment to StellarMate:

·

Mounts

·

CCDs

·

DSLRs

·

Focusers

·

Filter Wheels

To learn more about connecting your equipment to StellarMate, find out more in the

Summary of Contents for Stellar Mate Plus




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands