iKarus Stellar Mate Plus User Manual Download Page 101

Page: 101 / 227

The StellarMate Plus Manual

101 / 227

clicking on the save icon on the camera status bar. It is saved as a time-stamped JPG image.

Exporting to PC/Mac

If you captured images and saved them to StellarMate, then they should be available by
default under

/home/stellarmate/Pictures

. To access the images over the network, there

are two options:

Windows

, click on the Network icon in the left pane of File Explorer as illustrated below.

If you do not see the StellarMate network share, please map the network drive as shown in
this video:

On Linux & MacOS: Use FileZilla to connect to StellarMate via Secure FTP (sftp) using your
username (stellarmate) and password (smate). Remember to set port to 5624.

Summary of Contents for Stellar Mate Plus



































































































































































































































Search results

Summary of Contents for Stellar Mate Plus

Reviews:

Brands by name

Popular brands

iKarus Stellar Mate Plus, User Manual

Search results

Summary of Contents for Stellar Mate Plus

Reviews:

Brands by name

Popular brands