Draco tera
48
2020-02-26
You can select the following traps:
Trap
Description
Status
Notification about matrix status
Temperature
Notification about temperature within the matrix
Insert Board
Notification about insertion of a new I/O board into a
slot
Remove Board
Notification about removal of an I/O board out of a
slot
Invalid Board
Notification about a faulty I/O board
Insert Extender
Notification about a newly connected extender to
the matrix, notification about a switched on
extender, notification about a newly established link
between extender and matrix
Remove Extender Notification about a removed extender from the
matrix, notification about a switched off extender,
notification about an interrupted link between
extender and matrix
Switch Command
Notification about a performed switching operation
at the matrix
Fan Tray #1
Notification about the status of fan tray #1
Fan Tray #2
Notification about the status of fan tray #2
Power Supply #1
Notification about the status of power supply unit #1
Power Supply #2
Notification about the status of power supply unit #2
Power Supply #3
Notification about the status of power supply unit #3
Power Supply #4
Notification about the status of power supply unit #4
In order to query the SNMP status, proceed as follows:
➔
Select
Status > SNMP
in the main menu.
For an activation of the SNMP agent function or the SNMP server
function, a restart of the matrix is necessary.
Two SNMP servers can be used at the same time.
