Draco tera
136
2020-02-26
You can select the following keyboard commands:
Function
Keyboard Command
Change assignment number of EXT unit
upwards
<+>
Change assignment number of EXT unit
downwards
<->
In order to create a new CPU Device, proceed as follows:
1. Press the
New Device
button.
2. Select a real CPU (
Create a standard CPU
) or a virtual CPU (
Create
a virtual CPU
) or a template of an existing CPU (
Choose template
).
A template can only be used if there is at least one existing CPU Device.
3. Press the
OK
button.
4. Determine all parameters that are relevant for the CPU.
5. To confirm the new CPU, press the
Apply
button.
In order to access a new CPU via matrix, an assignment of one or more
CPU type extender units is required. Proceed as follows:
1. Select the new CPU in the
CPU Devices
list.
2. Select one or more extenders in the
Extender available
list.
3. Perform the assignment by pressing the
>
button. To assign all
available extenders to the CPU, press the
>>
button.
The assignments are displayed in the
Extender assigned
list.
4. Confirm the assignment by pressing the
Apply
button.
In order to remove an extender assignment, proceed as follows:
1. Select a CPU in the
CPU Devices
list.
2. Select one or more extenders in the
Extender assigned
list.
3. Remove the assignment with the
<
button. To remove all existing
assignments, press the
<<
button.
4. Confirm the removal with the
Apply
button.
Pos : 80 / 806-IHSE/ Konfig urati on/480_C PU-Ei nst ellungen/C PU-Gruppen @ 17\mod_1503047374785_6. doc @ 186381 @ 3 @ 4
