Operation
2020-02-26
225
Switching Operations
To use the function Switch & Preview proceed as follows:
1. Select the button Connect in the symbol bar and connect to the matrix
that you would like to use.
2. Open a preconfigured monitor layout to be used via
Open Layout...
in the symbol bar. The layout file contains the file ending .dtl. If there
is not layout available yet, it can be created via Layout Designer.
3. To perform a switching operation, highlight the respective source
(CPU Device) in the lower sector of the working area and move it to
the intended CON Device in the monitor layout (drag & drop).
4. To copy an existing connection to another monitor, highlight an
already connected monitor (CON Device) and move it to the new
monitor (drag & drop).
5. To disconnect an existing connection, highlight the respective CON
Device and move it to the symbol
Disconnect
.
The connection will be immediately disconnected.
Menu
– Default Layout
