Draco tera
164
2020-02-26
2. Activate
Manual
option, if the USB-HID switching is to be restricted to
keyboard commands (see Chapter 6.7, Page 221).
Manual switching allows the use of multi-head consoles.
3. In the
Arrangement
field, select the layout for the CON Devices you
want to configure. Select as follows:
–
Horizontal
: horizontal arrangement
–
Block
: block arrangement
–
Free
: free arrangement (The free arrangement allows a flexible
positioning of the displays for diverse applications.)
The fields for the configuration of the individual displays will be
arranged accordingly.
4. Select one or more control displays within the CON Device by setting
the
Control
function to
Y
in the respective display field.
Control displays are referred to the extender units within the Multi-
Screen Control that are connected to keyboard and mouse.
5. When using the
Owner
function, you can determine which control
display is permitted for USB-HID switching to the different displays.
Select that display from the list.
In order to make a display accessible for all neighboring control
displays, set the
Owner
function to
shared
.
6. Use the
Frame
function to configure a red frame that shows the
current display with mouse control after the expiration of a selectable
timer.
The frame to fade in can be individually activated by using a timer
>0 seconds.
7. For the use of Multi-Head sources (computer, CPU), an additional
configuration of the CPU Devices is mandatory. To do this, select
Extender & Devices > CPU Devices
in the working area. Select the
CPU Device to be configured und open the tab
Monitor
Arrangement
.
The configuration of CPU Devices, which are connected to Single-
Head-Sources (computer, CPU) is not mandatory.
8. Enter the resolution of the total desktop area into the fields
Total
Desktop Resolution
. For instance, if there are 4 graphic card outputs
with a resolution of 1920x1080 each, you have to enter 7680 under
Width
and 1080 under
Height
.
