Ihse Draco tera 480 Series User Manual Download

Page: 205 / 261

Operation

2020-02-26

205

Direct Switching of Video

1. Start Command Mode with the 'Hot Key'.

Shift

and

Scroll

LEDs on the keyboard will flash, if command mode is

activated.

2. Enter the index number of the new CPU from the list of favorites and

confirm with <Space>.

At the same time Command Mode is closed and the console is
connected to the new CPU with video only.

Example: Switching to favourite CPU 1 with video only

Switch to previous CPU

1. Start Command Mode with the 'Hot Key'.

Shift

and

Scroll

LEDs on the keyboard will flash, if Command Mode

is activated.

2. Press the key <p> of your keyboard.

At the same time Command Mode is closed and the console is

connected to the previous CPU with complete control.

If you switch to a CPU that was previously connected with Video Access
only, you will be connected to this CPU with full KVM access.

You can only switch to valid, unused CPUs using 'Hot Keys'. The options

Force Connect

and

Force Disconnect

as well as the restrictions of the

User ACL and CON ACL are taken into account.
'Hot Keys' are only supported, if neither

Enable User Login

nor the

Enable User ACL

is selected and the user is logged in the OSD.

Disconnect current Connection

1. Start Command Mode with the 'Hot Key'.

Shift

and

Scroll

LEDs on the keyboard will flash, if Command Mode

is activated.

2. Press the key <Backspace> of your keyboard.

The Command Mode is closed and the console is disconnected from
the previous connected CPU.

Pos : 118 /806- IHSE/zz _Lay out/ Sei tenumbr uch @ 8\m od_1348581820516_0. doc @ 69462 @ @ 1

Summary of Contents for Draco tera 480 Series






































































































































































































































































Search results

Summary of Contents for Draco tera 480 Series

Reviews:

Related manuals for Draco tera 480 Series

Brands by name

Popular brands

Ihse Draco tera 480 Series, User Manual

Search results

Summary of Contents for Draco tera 480 Series

Reviews:

Related manuals for Draco tera 480 Series

Brands by name

Popular brands