DX1063
Universal display
32
•
White
u
Select [Signal name color] and set the font colour of the signal name in the event of an alarm:
Value
Description
Default
In the event of an alarm, the font colour of the signal name re-
mains white.
Meas. value
Use the value from [Ax display color] for the font colour of the
signal name in the event of an alarm
Tab. 13: Signal name color
9.5 Restore factory settings
In order to put the unit into a defined basic state, it is possible to perform a reset and restore the
factory settings as follows:
u
Disconnect the unit from the voltage supply.
u
Press the [●] key and reconnect the unit with the voltage supply. Hold down the [●] key until the
unit displays [Reset config].
u
Select [YES] to restore the factory settings.
All user-specific settings will be lost.
OR
[NO] to cancel the operation and keep the user-specific settings
.