24
Mode
/Enter
Set
SP1
SP2
10
3
°C
m
3
m
3
/h
l/min
2
1
4
3
5
Controls and indicating elements
4 x LED yellow
Display functions
- 10
3
: The displayed value must be multiplied with
the factor 1000.
- Unlabelled LED: Lights when the basic value
(= 100%) of the parameter
CGA
(customer-specific
calibration) has been changed.
- SP1 / SP2: Indication of the switching status, LED
lights if the corresponding output is switched.
4 x LED green
Lighting LED = set display unit:
- LED 1 (
l/min
) / LED 2 (
m
3
/h
): Flow rate in l/min
or m
3
/h.
- LED 3 (
m
3
): Flow rate meter reading in m³.
LED 3 flashing: Stored meter reading
(= meter reading before the last reset).
- LED 4 (
°C
): Medium temperature in °C.
4-digit
alphanumeric
display
- Indication of the current flow rate.
- Indication of the meter reading.
- Indication of the current medium temperature.
- Indication of the parameters and parameter values.
Mode / Enter
pushbutton
Selection of the parameters and acknowledgement
of the parameter values.
Set pushbutton
- Setting of the parameter values
(scrolling by holding pressed; incremental by
pressing briefly).
- Change of the display unit in the Run mode.
1
2
3
4
5
