4.2
M
ODES OF
IER 506B P
RINTER
O
PERATION
The printer features two modes of operation:
- On line mode, used for normal printer operation. In this mode, the printer
to host connection is active.
- Off line mode giving access to the following three functions:
•
Printing test documents
•
Configuring the printer, refer to the IER 506B Printer Technical
Manual, IER P/N N0B412A,
•
Ejecting a document through the rear feed slot,
see
Clearing a
Document Jam.
In this mode, the printer to host connection is inactive.
4.3
P
RINTING
D
OCUMENTS
Preliminary Steps: Before starting to print, it is important to check the
following:
- Printer connection to the AC line power and the data
I/O source, see Connecting the Printer
- Printer power up, see Powering Up the IER 506B
Printer
- Media loading, see Inserting Blank Media into the
Printer
- Printer Functions, see
IER 506B Printer Front
Panel
4.3.1. Procedure
a) Set the printer to the On line mode by pressing the On/Off line
key.
b) Send a print command from the host system.The Reception
indicator lights up and remains lit until the document is printed.
When printing is completed and if the printer features the optional
cutter or buster, the document is automatically separated from the
continuous media and made available to the operator.
PRINTER IER 506B
User Guide
Page 26
N0B402A Rev. 1
May 25, 2007
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
