2.2
P
OWERING
U
P THE
IER 506B P
RINTER
2.2.1. Procedure
a) At the rear of the printer, set the AC power switch to the
I-position
Figure 2.3
Powering Up the Printer
For a few seconds, the printer tests the heating elements of the
printhead and displays the test results.
On completion of the testing phase, the printer either
beeps and displays a message requesting paper loading if no
media has been loaded,
see
Inserting Blank Media into the
Printer, or
is ready for printing, if media has been loaded.
PRINTER IER 506B
User Guide
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
Page 13
N0B402A Rev. 1
May 25, 2007