6.4
C
LOSING
/L
OCKING THE
P
RINTHEAD
A
SSEMBLY
IMPORTANT :
Before starting to use the printer, make sure the
printhead assembly is closed and locked.
6.4.1. Procedure
a) Fully rotate handle (2) towards the front until the printhead
assembly locks into its lower position. Make sure that it is
securely locked and cannot move back.
b) Lower the paper drive lever (1) to lock the printhead assembly
into the operating position.
PRINTER IER 506B
User Guide
Page 38
N0B402A Rev. 1
May 25, 2007
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization