IEMCA SIR52 MS52 F, Manual For Use And Maintenance

Page: 32 / 212

EN
4 - HANDLING AND INSTALLATION SIR 52 MS52 P/F
4 - Pag. 4 / 22
LIFTING WITH TUBE
Table 1.Belt length
Model Version Belt C (mm) Belt D (mm)
33 3000 3000
38 2500 3000
SIR 52-MS 52 P
SIR 52-MS 52 F
43 2500 3000
To lift the bar feeder it is necessary to fix the eye-
bolts (A) to the supports.
Check the length of the belts(C) and (D) and apply
wooden pads (E).
Use a bridge crane or a self-propelled crane.
To uplift the hydraulic drive unit, use belts or chains
together with a bridge crane or a self-moving crane
having an appropriate loading capacity.
INFORMATION:
Before lifting and moving the bar feeder,
make sure that the eye-bolts are properly
and firmly fixed against the support
surface, that the front nose has been
correctly positioned and that the rings are
rigidly fixed.
Do not let weights swing or bounce during
transport.