IEI Technology WSB-9154 User Manual Download Page 34

Page: 34 / 227

WSB-9154 CPU Card

Page 16

to six PCM audio output channels. Complete surround sound requires six-channel audio

consisting of:

Front left

Front right

Back left

Back right

Center

Subwoofer

2.6.3 Intel

High Definition Audio Controller

The Intel

High Definition Audio controller integrated into the ICH6 is connected to the

on-board audio connector. The audio connector is connected to an optional 5.1 channel

(ALC655) audio kit with an embedded AC’97 audio codec or an optional 7.1 channel

(ALC883) High Definition Audio codec. The audio controllers support up to six PCM audio

output channels. Complete surround sound requires six-channel audio consisting of:

Front left

Front right

Back left

Back right

Center

Subwoofer

In addition to the basic surround sound features, the High Definition audio kit also features

multi-streaming functionality.

Summary of Contents for WSB-9154




































































































































































































































Search results

Summary of Contents for WSB-9154

Reviews:

IEI Technology WSB-9154, User Manual, Page: 34 / 227

Search results

Summary of Contents for WSB-9154

Reviews: