IEI Technology WSB-9154, User Manual, Page: 105 / 227

WSB-9154 CPU Card
Page 87
Step 2: Align the connectors . Correctly align pin 1 on the cable connector with pin 1 on
the WSB-9154 serial port connector.
Step 3: Insert the cable connectors . Once the cable connector is properly aligned with
the serial port connector on the WSB-9154, connect the cable connector to the
on-board connectors. See Figure 5-14.
Figure 5-14: Dual Serial Port Connector Cable Connection
Step 4: Attach DB-9 serial port connectors to the chassis . The dual DB-9 serial port
connectors can be inserted into dual preformed holes in the chassis. Once,
inserted the DB-9 connectors should be secured to the chassis with retention
screws. Step 0:
5.6.7 USB Cable (Dual Port)
The WSB-9154 is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1: Locate the connectors . The locations of the USB connectors are shown in
Chapter 3 .