IEI Technology WSB-9154 User Manual Download Page 185

Page: 185 / 227

WSB-9154 CPU Card

Page 167

Step 10:

The

Locate File

window appears (Figure 7-22).

Figure 7-22: Location Browsing Window

Step 11:

Select the proper OS folder under the “

X:\3-LAN\BROADCOM BCM57xx

Drivers

” directory in the

Locate File

window, where “

X:\”

is the system CD

drive.

Step 12:

Click

PEN

and the driver is installed.

Step 0:

7.6 Realtek AC`97 Audio Driver (ALC665) Installation

To install the Realtek AC `97 audio driver, please follow the steps below.

7.6.1 BIOS Setup

Step 1:

Enter the BIOS setup. To do this, reboot the system and press

during POST.

Step 2:

Go to the Southbridge Configuration menu. Set the

Audio Controller

option to

[AC`97].

Step 3:

Press

F10

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

7.6.2 Driver Installation

To install the audio driver please follow the steps below.

Summary of Contents for WSB-9154




































































































































































































































Search results

Summary of Contents for WSB-9154

Reviews:

IEI Technology WSB-9154, User Manual, Page: 185 / 227

Search results

Summary of Contents for WSB-9154

Reviews: