IEI Technology WSB-9154 Page 155 User Manual Download

Page: 155 / 227

WSB-9154 CPU Card

Page 137

6.5.4 Removable Drives

Use the Removable Drives menu (

BIOS Menu 19

) to specify the boot sequence of the

available FDDs. When the menu is opened, the FDDs connected to the system are listed

as shown below:

1st Drive

[1st FLOPPY DRIVE]

2nd Drive

[2nd FLOPPY DRIVE]

NOTE:

Only the drives connected to the system are shown. For example, if

only one FDD is connected only “

1st Drive

” is listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available FDDs is shown. Select the first FDD the system boots from. If

the “

1st Drive

” is not used for booting this option may be disabled.

BIOS Menu 19: Removable Drives

Summary of Contents for WSB-9154




































































































































































































































Search results

Summary of Contents for WSB-9154

Reviews:

Related manuals for WSB-9154

Brands by name

Popular brands

IEI Technology WSB-9154, User Manual

Search results

Summary of Contents for WSB-9154

Reviews:

Related manuals for WSB-9154

Brands by name

Popular brands