IEI Technology WSB-9154, User Manual

Page: 43 / 227

WSB-9154 CPU Card
Page 25
+3.3V
+5.0V
+12.0V
DDR Vtt
+1.5V
5VSB
The WSB-9154 Super I/O Enhanced Hardware Monitor also monitors the following
voltages internally:
VBAT
The WSB-9154 Super I/O Enhanced Hardware Monitor also monitors the following fan
speeds:
CPU Fan speed
The values for the above environmental parameters are all recorded in the BIOS
Hardware Health Configuration menu.
2.8.2 Operating Temperature and Temperature Control
The maximum and minimum operating temperatures for the WSB-9154 are listed below.
Minimum Operating Temperature: 0ºC (32°F)
Maximum Operating Temperature: 60°C (140°F)
A cooling fan and heat sink must be installed on the CPU. Thermal paste must be
smeared on the lower side of the heat sink before it is mounted on the CPU. Heat sinks
are also mounted on the northbridge and southbridge chipsets to ensure the operating
temperature of these chips remain low.
2.8.3 Power Consumption
Table 2-4 shows the power consumption parameters for the WSB-9154 running with a
3.4GHz Intel® Pentium® 4 processor through an 80MHz FSB and with 2GB of 533MHz
DDR2 memory.