IEI Technology WSB-9154 Page 100 User Manual Download

Page: 100 / 227

WSB-9154 CPU Card

Page 82

5.6.3 FDD Cable Connection

NOTE:

This is an optional item that must be ordered separately. For further

information please contact the nearest WSB-9154 distributor, reseller

or vendor or contact an iEi sales representative directly. Send any

queries to

[email protected]

The FDD flat cable connects to the WSB-9154 to one FDD device. To connect an FDD to

the WSB-9154 please follow the instructions below.

Step 1:

Locate the FDD connector

. The location of the FDD device connector is shown

Chapter 3

Step 2:

Insert the connector

. Connect the FDD cable connector to the on-board

connector. See

Figure 5-10

. A key on the front of the cable connector ensures it

can only be inserted in one direction.

Summary of Contents for WSB-9154




































































































































































































































Search results

Summary of Contents for WSB-9154

Reviews:

Related manuals for WSB-9154

Brands by name

Popular brands

IEI Technology WSB-9154, User Manual

Search results

Summary of Contents for WSB-9154

Reviews:

Related manuals for WSB-9154

Brands by name

Popular brands