IEI Technology WSB-9154 Page 167 User Manual Download

Page: 167 / 227

WSB-9154 CPU Card

Page 149

Save Changes and Exit

Use the Save Changes and Exit option to save the changes made to the BIOS options and

to exit the BIOS configuration setup program.

Discard Changes and Exit

Use the Discard Changes and Exit option to exit the BIOS configuration setup program

without saving the changes made to the system.

Discard Changes

Use the Discard Changes option to discard the changes and remain in the BIOS

configuration setup program.

Load Optimal Defaults

Use the Load Optimal Defaults option to load the optimal default values for each of the

parameters on the Setup menus. F9 key can be used for this operation.

Load Failsafe Defaults

Use the Load Failsafe Defaults option to load failsafe default values for each of the

parameters on the Setup menus. F8 key can be used for this operation.

Summary of Contents for WSB-9154




































































































































































































































Search results

Summary of Contents for WSB-9154

Reviews:

Related manuals for WSB-9154

Brands by name

Popular brands

IEI Technology WSB-9154, User Manual

Search results

Summary of Contents for WSB-9154

Reviews:

Related manuals for WSB-9154

Brands by name

Popular brands