IEI Technology TANK-870AI SERIES, User Manual

Page: 87 / 137

TANK-870AI Embedded System
Page 73

Enabled D
EFAULT
Enable the serial port

Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D
EFAULT
The serial port IO port address and interrupt
address are automatically detected.

IO=3E0h; IRQ=10
Serial Port I/O port address is 3E0h and the
interrupt address is IRQ10

IO=3E8h; IRQ=3,
4, 7, 9, 10, 11
Serial Port I/O port address is 3E8h and the
interrupt address is IRQ3, 4, 7, 9, 10, 11

IO=2E8h; IRQ=3,
4, 7, 9, 10, 11
Serial Port I/O port address is 2E8h and the
interrupt address is IRQ3, 4, 7, 9, 10, 11

IO=3E0h; IRQ=3,
4, 7, 9, 10, 11
Serial Port I/O port address is 3E0h and the
interrupt address is IRQ3, 4, 7, 9, 10, 11

IO=2E0h; IRQ=3,
4, 7, 9, 10, 11
Serial Port I/O port address is 2E0h and the
interrupt address is IRQ3, 4, 7, 9, 10, 11

Device Mode [RS232]
Use the Device Mode option to select the serial port mode.

RS232 D
EFAULT
Enables serial port RS-232 support.

RS422
Enables serial port RS-422 support.

RS485
Enables serial port RS-485 support.
5.3.6.1.6 Serial Port 6 Configuration

Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.