IEI Technology PCIE-G41A2 User Manual Download

Page: 92 / 151

PCIE-G41A2 PICMG 1.3 CPU card

Page 80

USB 2.0 Controller [Enabled]

Use the

USB 2.0 Controller

BIOS option to enable or disable the USB 2.0 controller

Enabled D

EFAULT

USB 2.0 controller enabled

Disabled

USB 2.0 controller disabled

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Auto

Legacy USB support disabled if no USB devices are

connected

USB2.0 Controller Mode [HiSpeed]

Use the

USB2.0 Controller Mode

option to set the speed of the USB2.0 controller.

FullSpeed

The controller is capable of operating at 12 Mb/s

HiSpeed D

EFAULT

The controller is capable of operating at 480 Mb/s

Summary of Contents for PCIE-G41A2
























































































































































Search results

Summary of Contents for PCIE-G41A2

Reviews:

Related manuals for PCIE-G41A2

Brands by name

Popular brands

IEI Technology PCIE-G41A2, User Manual

Search results

Summary of Contents for PCIE-G41A2

Reviews:

Related manuals for PCIE-G41A2

Brands by name

Popular brands