manualshive.com logo in svg

IEI Technology KINO-9652, User Manual, Page: 95 / 269

Share
Download
IEI Technology KINO-9652 User Manual Download Page 95

 

 

KINO-9652 Mini-ITX SBC

 

Page 73

5.3 CPU, CPU Cooling Kit and DIMM Installation 

 WARNING: 

A CPU should never be turned on without the specified cooling kit 

being installed. If the cooling kit (heat sink and fan) is not properly 

installed and the system turned on, permanent damage to the CPU, 

KINO-9652 and other electronic components attached to the system 

may be incurred. Running a CPU without a cooling kit may also result 

in injury to the user. 

The CPU, CPU cooling kit and DIMM are the most critical components of the KINO-9652. 

If one of these component is not installed the KINO-9652 cannot run. 

5.3.1 Socket P CPU Installation 

 WARNING: 

CPUs are expensive and sensitive components. When installing the 

CPU please be careful not to damage it in anyway. Make sure the CPU 

is installed properly and ensure the correct cooling kit is properly 

installed. 

To install a socket P CPU onto the KINO-9652, follow the steps below: 

 WARNING: 

When handling the CPU, only hold it on the sides. DO NOT touch the 

pins at the bottom of the CPU. 

Step 1: 

Unlock the CPU retention screw.

 When shipped, the retention screw of the 

Summary of Contents for KINO-9652














































































































































































































































































Reviews:

No comments