manualshive.com logo in svg

IEI Technology KINO-9652, User Manual, Page: 93 / 269

Share
Download
IEI Technology KINO-9652 User Manual Download Page 93

 

 

KINO-9652 Mini-ITX SBC

 

Page 71

5.2 Installation Considerations 

 

NOTE: 

The following installation notices and installation considerations should 

be read and understood before the KINO-9652 is installed. All 

installation notices pertaining to the installation of the KINO-9652 

should be strictly adhered to. Failing to adhere to these precautions 

may lead to severe damage of the KINO-9652 and injury to the person 

installing the motherboard. 

5.2.1 Installation Notices 

 WARNING: 

The installation instructions described in this manual should be 

carefully followed in order to prevent damage to the KINO-9652, 

KINO-9652 components and injury to the user. 

Before and during the installation please 

DO

 the following: 

 

Read the user manual

: 

o 

The user manual provides a complete description of the KINO-9652 

installation instructions and configuration options. 

 

Wear an electrostatic discharge cuff (ESD)

: 

o 

Electronic components are easily damaged by ESD. Wearing an ESD cuff 

removes ESD from the body and helps prevent ESD damage. 

 

Place the KINO-9652 on an antistatic pad

: 

o 

When installing or configuring the motherboard, place it on an antistatic 

pad. This helps to prevent potential ESD damage. 

 

Turn all power to the KINO-9652 off

: 

Summary of Contents for KINO-9652














































































































































































































































































Reviews:

No comments