manualshive.com logo in svg

IEI Technology KINO-9652, User Manual, Page: 223 / 269

Share
Download
IEI Technology KINO-9652 User Manual Download Page 223

 

 

KINO-9652 Mini-ITX SBC

 

Page 201

Step 10: 

Enable or disable DHCP. DHCP is enabled by default. If DHCP is disabled, enter 

the following TCP/IP settings: 

 

Static TCP/IP address (the static TCP/IP address and Intel® AMI Host Name 

must be different from those configured in the operating system) 

 

Subnet mask 

 

Default Gateway address (optional) 

 

Preferred Domain Naming Services (DNS) serer address (optional) 

 

Alternate DNS server address (optional) 

 

Domain name (optional) 

Step 11: 

Make other necessary settings in the Intel® MEBx depending on users’ need. 

Step 12: 

To exit the Intel® MEBx, return to the main menu and select 

Exit

. (

Figure 8-10

)

 

Step 0:

 

 

Figure 8-10: Exit 

 

 

 

 

 

 

Summary of Contents for KINO-9652














































































































































































































































































Reviews:

No comments