IEI Technology KINO-9652 User Manual Download Page 164

Page: 164 / 269

KINO-9652 Mini-ITX SBC

Page 142

15MB – 16MB

Between 15MB and 16MB of memory is reserved for

ISA expansion cards

Boots Graphics Adapter Priority [IGD]

Use the

Boots Graphics Adapter Priority

option to select the graphics controller used as

the primary boot device. Select either an integrated graphics controller (IGD) or a

combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.

Configuration options are listed below:

IGD

EFAULT

PCI/IGD

Internal Graphics Mode Select [Enable, 8MB]

Use the

Internal Graphic Mode Select

option to specify the amount of system memory

that can be used by the Internal graphics device.

Disable

Enable, 1MB

1MB of memory used by internal graphics device

Enable, 8MB

EFAULT

8MB of memory used by internal graphics device

6.7.1.1 Video Function Configuration

Use the

Video Function Configuration

menu to configure the video device connected to

the system.

Boot Display Device [Auto]

Use the

Boot Display Device

option to select the display device used by the system

when it boots. Configuration options are listed below.

Auto

EFAULT

CRT

Summary of Contents for KINO-9652














































































































































































































































































Search results

Summary of Contents for KINO-9652

Reviews:

IEI Technology KINO-9652, User Manual, Page: 164 / 269

Search results

Summary of Contents for KINO-9652

Reviews: