IEI Technology KINO-9652 User Manual Download Page 92

Page: 92 / 269

KINO-9652 Mini-ITX SBC

Page 70

5.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

KINO-9652 may result in permanent damage to the KINO-9652 and

severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the KINO-9652. Dry climates are especially susceptible to ESD. It is therefore

critical that whenever the KINO-9652, or any other electrical component is handled, the

following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

: Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: When configuring the KINO-9652, place it on an

antic-static pad. This reduces the possibility of ESD damaging the

KINO-9652.

Only handle the edges of the PCB

: When handling the PCB, hold the PCB

by the edges.

Summary of Contents for KINO-9652














































































































































































































































































Search results

Summary of Contents for KINO-9652

Reviews:

IEI Technology KINO-9652, User Manual, Page: 92 / 269

Search results

Summary of Contents for KINO-9652

Reviews: