manualshive.com logo in svg

IEI Technology KINO-9652, User Manual, Page: 110 / 269

Share
Download
IEI Technology KINO-9652 User Manual Download Page 110

 

 

KINO-9652 Mini-ITX SBC

Page 88 

unit, the cooling fan of a power supply can also help generate airflow through the board 

surface. 

 

NOTE: 

IEI has a wide range of backplanes available. Please contact your 

KINO-9652 vendor, reseller or an IEI sales representative at 

[email protected]

 or visit the IEI website (

http://www.ieiworld.com.tw

) 

to find out more about the available chassis. 

5.5.2 Motherboard Installation 

To install the KINO-9652 motherboard into the chassis, please refer to the reference 

material that came with the chassis. 

5.6 Internal Peripheral Device Connections 

5.6.1 Peripheral Device Cables 

The cables listed in 

Table 5-8

 are shipped with the KINO-9652. 

Quantity 

Type 

1 IDE 

cable 

1 RS-232/422/485 

cable 

2 

SATA drive cables 

1 

SATA drive power cable 

Table 5-8: IEI Provided Cables 

Optional cables are listed below: 

 

USB cable (dual port) 

Summary of Contents for KINO-9652














































































































































































































































































Reviews:

No comments