IEI Technology KINO-9652 User Manual Download Page 162

Page: 162 / 269

KINO-9652 Mini-ITX SBC

Page 140

password. After the password has been added,

Install

appears next to

Change User

Password

Clear User Password

Use the

Clear User Password

to clear a user’s password. The default for this option is

Not Installed

. If a user password must be cleared, use this option.

6.7 Chipset

Use the

Chipset

menu to access the NorthBridge, SouthBridge and ME Subsystem

configuration menus.

WARNING!

Setting the wrong values for the Chipset BIOS selections in the Chipset

BIOS menu may cause the system to malfunction.

6.7.1 NorthBridge Configuration

Use the

Northbridge Chipset Configuration

menu (

BIOS Menu 23

) to configure the

Northbridge chipset.

Summary of Contents for KINO-9652














































































































































































































































































Search results

Summary of Contents for KINO-9652

Reviews:

IEI Technology KINO-9652, User Manual, Page: 162 / 269

Search results

Summary of Contents for KINO-9652

Reviews: