manualshive.com logo in svg

IEI Technology KINO-9652, User Manual, Page: 170 / 269

Share
Download
IEI Technology KINO-9652 User Manual Download Page 170

 

 

KINO-9652 Mini-ITX SBC

Page 148 

 

Save Changes and Exit   

Use the 

Save Changes and Exit

 option to save the changes made to the BIOS options 

and to exit the BIOS configuration setup program. 

 

Discard Changes and Exit   

Use the 

Discard Changes and Exit

 option to exit the BIOS configuration setup program 

without saving the changes made to the system. 

 

Discard Changes 

Use the 

Discard Changes 

option to discard the changes and remain in the BIOS 

configuration setup program. 

 

Load Optimal Defaults 

Use the 

Load Optimal Defaults

 option to load the optimal default values for each of the 

parameters on the Setup menus. 

F9 key can be used for this operation.

 

 

Load Failsafe Defaults 

Use the 

Load Failsafe Defaults 

option to load failsafe default values for each of the 

parameters on the Setup menus. 

F8 key can be used for this operation.

 

Summary of Contents for KINO-9652














































































































































































































































































Reviews:

No comments