IEI Technology IOWA-MARK Page 157 User Manual Download

Page: 157 / 232

IOWA-MARK Half-size CPU Card

Page 137

S1 (POS)

(Default) System appears off. The CPU is stopped; RAM is

refreshed; the system is running in a low power mode.

S3 (STR)

System appears off. The CPU has no power; RAM is in

slow refresh; the power supply is in a reduced power

mode.

PM Control by APM [Yes]

Use the

PM Control by APM

option to specify whether or not the BIOS determines if an

APM OS is being run on the system.

Yes

(Default)

The BIOS checks to see if an APM OS is installed. If the

OS is not an APM compliant OS, no PM functions are

made available.

BIOS enables the PM function

Video Off Option [Suspend

Off]

Use the

Video Off Option

option to specify the status of the system display when the

system is in a sleep or suspend state.

Always On

Display never turned off by system BIOS

Suspend

Off

(Default)

Display is off during when the system is in the

suspend mode

All Modes

Off

Display is off when the system is in the doze,

standby or suspend mode

Video Off Method [Blank Screen]

Use the

Video Off Method

option to specify what display components are powered off

when the system enters a sleep or suspend stat Method.

Summary of Contents for IOWA-MARK









































































































































































































































Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands

IEI Technology IOWA-MARK, User Manual

Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands