IEI Technology IOWA-MARK Page 219 User Manual Download

Page: 219 / 232

IOWA-MARK Half-size CPU Card

Page 199

Figure F-2: RAID BIOS Setup Utility

Step 7:

Configure the RAID settings

. Use the

RAID BIOS Setup Utility

Figure F-2

to configure the RAID array. Brief descriptions are given below.

Step 8:

Install the OS

. After the RAID array has been configured (see below) install the

OS. To do this, please refer to the documentation that came with the OS.

Step 0:

F.4 RAID Options:

F.4.1 Create RAID 0 Striping for Performance

WARNING:

All data previously stored on the member drives of a RAID

configuration

are destroyed

during the RAID initialization process. If

“used” drives are used to create a RAID array, make sure the data has

been moved or backed up before creating a RAID array out of the disk

drives.

Summary of Contents for IOWA-MARK









































































































































































































































Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands

IEI Technology IOWA-MARK, User Manual

Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands