IEI Technology IOWA-MARK Page 133 User Manual Download

Page: 133 / 232

IOWA-MARK Half-size CPU Card

Page 113

Disabled

(Default)

Disables SATA IDE use in DOS mode.

Enabled

Enables SATA IDE use in DOS mode.

Boot Device

Use the

Boot Device

options to select the order of the devices the system boots from.

There are three boot device configuration options:

First Boot Device

[Default: Floppy]

Second Boot Device

[Default: HDD-0]

Third Boot Device

[Default: LS-120]

Using the default values, the system first looks for a FDD to boot from. If it cannot find an

FDD, it boots from a HDD. If both the FDD and the HDD are unavailable, the system boots

from a LS-120 drive.

Boot Device configuration options are:

Floppy

LS120

HDD-0

SCSI

CDROM

HDD-1

HDD-2

HDD-3

ZIP100

USB-FDD

USB-ZIP

USB-CDROM

USB-HDD

LAN

Disabled

Summary of Contents for IOWA-MARK









































































































































































































































Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands

IEI Technology IOWA-MARK, User Manual

Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands