IEI Technology IOWA-MARK Page 145 User Manual Download

Page: 145 / 232

IOWA-MARK Half-size CPU Card

Page 125

Auto

(Default)

The chipset codec is automatically detected by BIOS.

Disabled

The chipset codec is disabled.

OnChip Modem [Auto]

Use the

OnChip Modem

option to enable or disable the chipset modem controller.

Auto

(Default)

The chipset modem is automatically detected by BIOS.

Disabled

The chipset modem is disabled.

OnBoard Audio [Enabled]

Use the

OnBoard Audio

option to enable or disable the onboard codec.

Disabled

The onboard codec is disabled.

Enabled

(Default)

The onboard codec is detected and enabled.

CPU to PCI Write Buffer [Enabled]

Use the

CPU to PCI Write Buffer

option to enable buffered writes from the CPU to the

PCI bus to compensate for the speed differences between the CPU and the PCI bus.

When disabled, the writes are not buffered and the CPU must wait until the write is

complete before starting another write cycle.

Disabled

(Default)

No buffering when writes from the CPU to the PCI bus

occurs

Enabled

Buffering when writes from the CPU to the PCI bus

occurs

Summary of Contents for IOWA-MARK









































































































































































































































Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands

IEI Technology IOWA-MARK, User Manual

Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands