IEI Technology IOWA-MARK Page 105 User Manual Download

Page: 105 / 232

IOWA-MARK Half-size CPU Card

Page 85

NOTE:

IEI has a wide range of backplanes available. Please contact your

IOWA-MARK vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.6.2 Backplane Installation

Before the IOWA-MARK can be installed into the chassis, a backplane must first be

installed. Please refer to the installation instructions that came with the backplane and the

chassis to see how to install the backplane into the chassis.

NOTE:

IEI has a wide range of backplanes available. Please contact your

IOWA-MARK vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.6.3 CPU Card Installation

To install the IOWA-MARK CPU card onto the backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

Summary of Contents for IOWA-MARK









































































































































































































































Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands

IEI Technology IOWA-MARK, User Manual

Search results

Summary of Contents for IOWA-MARK

Reviews:

Related manuals for IOWA-MARK

Brands by name

Popular brands