manualshive.com logo in svg

IEI Technology IMB-C2160, User Manual

Share
Download
IEI Technology IMB-C2160 User Manual Download Page 95

 

 

IMB-C2160 Mic ro -ATX  Mo th e rb o a rd  

P a g e   80 

Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

Intel Trusted Execution Technology Configuration 
 
Intel TXT support only can be enabled/disabled if SMX 
is enabled. VT and VT-d support must also be enabled prior 
to TXT. 
 
Secure Mode Extensons (SMX) 

Disabled 

 
Intel TXT(LT) Support 

[Disabled] 

 
 
 
 
--------------------- 



: Select Screen 

↑

 

↓

: Select Item 

Enter 

Select 

+ -   Change Opt. 
F1 

General Help 

F2 

Previous Values 

F3 

Optimized Defaults 

F4 

Save & Exit 

ESC  Exit 

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. 

BIOS Menu 8:

 

Intel TXT(LT) Configuration

 

5.3.7

 

AMT Co n fig u ra tio n  

The 

AMT Configuration

 menu (

BIOS Menu 9

) allows the advanced power management 

options to be configured. 

Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 
Intel AMT 

[Enabled] 

Unconfigure AMT/ME 

[Disabled] 

 

 
Enable/Disable Intel (R) 
Active Management Technology 
BIOS Extension. Note: iAMT H/W 
is always enabled. 
This option just controls the 
BIOS extension execution.  
If enabled, this requires 
additional firmware in the SPI 
device.  
--------------------- 



: Select Screen 

↑

 

↓

: Select Item 

Enter 

Select 

F1 

General Help 

F2 

Previous Values 

F3 

Optimized Defaults 

F4 

Save  

ESC 

Exit 

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. 

BIOS Menu 9: AMT Configuration

 

Summary of Contents for IMB-C2160














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands