IEI Technology IMB-C2160 User Manual Download

Page: 127 / 205

IMB-C2160 Mic ro -ATX Mo th e rb o a rd

P a g e 112

6.1

Ava ila b le S o ftwa re Drive rs

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:



Chipset



Graphics



LAN



Audio



SATA (Intel® Rapid Storage Technology)



USB 3.0



Intel® AMT

Installation instructions are given below.

6.2

S o ftwa re In s ta lla tio n

All the drivers for the IMB-C2160 are on the CD that came with the system. To install the

drivers, please follow the steps below.

S te p 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->CD Drive->autorun.exe"

S te p 2:

The driver main menu appears (Figure 6-1).

Summary of Contents for IMB-C2160














































































































































































































Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands

IEI Technology IMB-C2160, User Manual

Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands