IEI Technology IMB-C2160 User Manual Download Page 145

Page: 145 / 205

IMB-C2160 Mic ro -ATX Mo th e rb o a rd

P a g e 130

6.8

US B 3.0 Drive r In s ta lla tio n

WARNING:

Do not run this driver’s installer (Setup.exe) from a USB storage device

(ie. external USB hard drive or USB thumb drive). For proper

installation, please copy driver files to a local hard drive folder and run

from there.

To install the touch panel software driver, please follow the steps below.

S te p 1:

Access the driver list. (See

Section 6.2

)

S te p 2:

Click “

USB 3.0

”.

S te p 3:

Locate the setup file and double click on it.

S te p 4:

The

Welcome Screen

Figure 6-27

appears.

S te p 5:

Click

Next

to continue.

Figure 6-27: USB 3.0 Driver Welcome Screen

S te p 6:

The license agreement in

Figure 6-28

appears.

Summary of Contents for IMB-C2160














































































































































































































Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands

IEI Technology IMB-C2160, User Manual

Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands