IEI Technology IMB-C2160 User Manual Download

Page: 179 / 205

IMB-C2160 Mic ro -ATX Mo th e rb o a rd

P a g e 164

B.5

Re c o ve ry To o l Fu n c tio n s

After completing the initial setup procedures as described above, users can access the

recovery tool by pressing <

> while booting up the system. However, if the setup

procedure in Section B.3 has been completed and the auto recovery function is enabled,

the system will automatically restore from the factory default image without pressing the

F3 key. The recovery tool main menu is shown below.

Figure B-33: Recovery Tool Main Menu

The recovery tool has several functions including:

Factory Restore

: Restore the factory default image (iei.GHO) created in

Section B.2.5.

Backup system

: Create a system backup image (iei_user.GHO) which will be

saved in the hidden partition.

Restore your last backup

: Restore the last system backup image

Manual

: Enter the Symantec Ghost window to configure manually.

Quit

: Exit the recovery tool and restart the system.

WARNING:

Please do not turn off the system power during the process of system

recovery or backup.

Summary of Contents for IMB-C2160














































































































































































































Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands

IEI Technology IMB-C2160, User Manual

Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands