IEI Technology IMB-C2160 User Manual Download

Page: 176 / 205

IMB-C2160 Mic ro -ATX Mo th e rb o a rd

P a g e 161

S te p 2:

Install Linux operating system

. Make sure to install GRUB (v0.97 or earlier)

MBR type and Ext3 partition type. Leave enough space on the hard drive to

create the recover partition later.

NOTE:

If the Linux OS is not installed with GRUB (v0.97 or earlier) and Ext3,

the Symantec Ghost may not function properly.

While installing Linux OS, please create two partitions:



Partition 1:



Partition 2:

SWAP

NOTE:

Please reserve enough space for partition 3 for saving recovery

images.

Figure B-29: Partitions for Linux

S te p 3:

Create a recovery partition

. Insert the recovery CD into the optical disk drive.

Step 1

Step 3

described

Section B.2.2

. Then type the following

commands (marked in red) to create a partition for recovery images.

system32>

diskpart

DISKPART>

list vol

Summary of Contents for IMB-C2160














































































































































































































Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands

IEI Technology IMB-C2160, User Manual

Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands