IEI Technology IMB-C2160 User Manual Download

Page: 180 / 205

IMB-C2160 Mic ro -ATX Mo th e rb o a rd

P a g e 165

WARNING:

All data in the system will be deleted during the system recovery.

Please backup the system files before restoring the system (either

Factory Restore or Restore Backup).

B.5.1

Fa c to ry Re s to re

To restore the factory default image, please follow the steps below.

S te p 1:

Type <

> and press <

Enter

> in the main menu.

S te p 2:

The Symantec Ghost window appears and starts to restore the factory default. A

factory default image called

iei.GHO

is created in the hidden Recovery partition.

Figure B-34: Restore Factory Default

S te p 3:

The screen shown in

Figure B-35

appears when completed. Press any key to

reboot the system.

Summary of Contents for IMB-C2160














































































































































































































Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands

IEI Technology IMB-C2160, User Manual

Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands