IEI Technology IMB-C2160 User Manual Download

Page: 163 / 205

IMB-C2160 Mic ro -ATX Mo th e rb o a rd

P a g e 148

NOTE:

Use the following commands to check if the partitions were created

successfully.

S te p 6:

Press any key to exit the recovery tool and automatically reboot the system.

Please continue to the following procedure: Build the Recovery Partition.

Step

B.2.3

In s ta ll Op e ra tin g S ys te m , Drive rs a n d Ap p lic a tio n s

Install the operating system onto the unlabelled partition. The partition labeled "Recovery"

is for use by the system recovery tool and should not be used for installing the operating

system or any applications.

NOTE:

The operating system installation program may offer to reformat the

chosen partition. DO NOT format the partition again. The partition has

already been formatted and is ready for installing the new operating

system.

To install the operating system, insert the operating system installation CD into the optical

drive. Restart the computer and follow the installation instructions.

Summary of Contents for IMB-C2160














































































































































































































Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands

IEI Technology IMB-C2160, User Manual

Search results

Summary of Contents for IMB-C2160

Reviews:

Related manuals for IMB-C2160

Brands by name

Popular brands