manualshive.com logo in svg

IEI Technology AFL-xxA-N270 series, User Manual, Page: 121 / 171

Share
Download
IEI Technology AFL-xxA-N270 series User Manual Download Page 121

 

 

AFL-xxA-N270 Series Panel PC

Page 106 

7.1 Available Software Drivers 

 NOTE: 

The content of the CD may vary throughout the life cycle of the product 

and is subject to change without prior notice. Visit the IEI website or 

contact technical support for the latest updates. 

The following drivers can be installed on the system: 

 Chipset 

 VGA 

 Audio 

 LAN 

 Touch 

screen 

 Bluetooth 

 Wireless 

Installation instructions are given below. 

7.2 Starting the Driver Program 

To access the driver installation programs, please do the following. 

Step 1: 

Insert the CD-ROM that came with the system into a CD-ROM drive attached to 

the system. 

Step 2: 

Click 

AFL-xxA-N270 Series

. 

Step 3: 

Select the 

AFLMB-945GSE-R10

. 

Step 4: 

The list of drivers in 

Figure 7-1

 appears.

Step 4:

 

Summary of Contents for AFL-xxA-N270 series












































































































































































Reviews:

No comments