IDTECK Star iCON100SR, User Manual

Page: 62 / 90

SETTING CHANGES p.56
Duress Mode enables a cardholder under duress to activate a silent alarm to notify the securi
ty.
To enable or disable the Duress Mode and / or set the Duress Password, press <ENT> and pr
ess <4> or <6> to select either “DISABLE” or “ENABLE” If you select “ENABLE” the LCD will dis
play the current “DURESS PASSWORD”. To change the password, press <ENT> and enter the
desired 2-Digit Duress Password, and press <ENT> again to confirm. If you do not wish to ch
ange the password, press <ESC>.
In case of duress, enter the 2Digit Duress Password and press <ENT> prior to the re
gular access process. Following a successful access process, access will be granted
as usual but, at the same time, a duress alarm will be generated.
2.11 Door Open Alarm Time
Door Open Alarm Time refers to the delay between the time at which the Door Relay time fi
nishes and the time at which a Door Open Alarm is activated. To change the Door Open Ala
rm Time, press <ENT> and enter a 2Digit number as follows;
00
The alarm will be activated immediately if the door is still left open past the Door Rela
y Time.
01-98
Delay (01-98 sec) will be inserted before an alarm is activated.
99
No alarm.
After entering the number, press <ENT> to confirm.