IDTECK Star iCON100SR, User Manual

Page: 57 / 90

p.51 Setup Menu F2
You can also define time schedule codes using the Application Software. For more
information, please refer to the Software Manual.
2.3 Holiday Code
The Holiday code setting lets you link a holiday schedule to a time schedule. The default holi
day schedule code is 00, which means no holidays are applied to the time schedule.
Use <4> or <6> to scroll up or down from the T/S code 01 to 10, and press <ENT>. Then, ent
er a 2Digit holiday schedule code and press <ENT> to store the changed settings to the mem
ory. To return to the previous menu, press <ESC>.
2.4 Reader Time Schedule
You can select one of 2 Access Modes (i.e. RF Only Mode, RF+PW Mode) in “READER1 MO
DE” of “F1 SETUP MENU”. However, you may apply RF Only Mode during a certain period of
the day. For example, if you wish to allow RF-Only Access from 09:00 to 17:00 while using fi
ngerprint verification for the rest of the time, you can proceed as follows;
1. Set “READER 1 MODE” to RF+P/W Mode.
2. Define T/S code 01 so that it can include a Time Interval between 09:00 and 17:00 for t
he desired days of the week.
3. Here in Reader T/S, press <ENT>, enter the 2Digit T/S code (In this case, 01), and then p
ress <ENT> again to confirm.
4. To return to the previous menu, press <ESC>.