Troubleshooting
p.80
If the problem persists, please contact service center.
5
The device work well with RF Card, but does not work
when inputting card number.
5.1
Please check if Keypad is set to "ENABLE".
The default of the keypad input is "DISABLE".
1.
See
[Setting Changes] > [Setup Menu F2] > [RD Key Input]
of the manual and set it to
"USE".
2.
Or, set keypad setting to "ENABLE" from a software and transmit it to the device.
If the problem persists, please contact service center.
6
When the device have read a card, the device does no
t response or a different card number appears.
6.1
Please check if a reader is good.
1.
Check input power of the reader.
Check if LED blinks when the reader reads a card.
2.
Check if the reader is good.
Disconnect the reader from the system and measure output terminal of the reader using
a oscilloscope.
Summary of Contents for Star iCON100SR
