IDTECK Star iCON100SR, User Manual

Page: 41 / 90

p.35 Setting Maximum Number of Cardholder IDs
4 Setting Maximum Number of Cardholder IDs
You can set the maximum number of cardholder IDs that can be registered on your iCON10
0. By default, the iCON100 is set to store up to 10,000 cardholders and 50,000 events and y
ou can adjust this setting to increase the cardholder capacity at the expense of event memor
y.
To change the ID memory setting, enter the “Setup Mode” (Refer to 10.2 Entering setup mo
de), press <F3>, then press <6> 4 times until you can see “5.MAX USER SETUP” on the LCD.
(See figure 1.) Once the “5.MAX USER SETUP” item appears on the LCD, press <ENT>, and p
ress <4> or <6> to select “10000/50000”, “20000/40000”, “30000/30000”, “40000/20000” o
r “50000/10000” (No. of IDs / No. of events), and then press <ENT> again to confirm.
Prior to changing the maximum number of cardholders, you must clear the event
data from the memory. Because entering the Setup Mode itself generates an event,
you must always initialize the event memory prior to changing the maximum ID nu
mber setting. For additional information on how to intialize the event memory.(Ref
er to 12.1.9 Event clear). If you attempt to change the setting with some event dat
a still in the memory, the LCD will display “EVENT MEMORY NOT EMPTY” error me
ssage. (See figure 2.)
If you attempt to reduce the ID memory size to a value lower than the current num
ber of IDs stored in the memory, the LCD will display the “ID TOTAL COUNT WRON
G” error message. (See figure 3.) If this is the case, please clear the card data from
the memory. For additional information on how to initialize the card memory (Refe
r to 12.1.8 All ID clear.)